A systematic approach to preliminary polymer process development: modeling and design

A general and complete methodology is presented to facilitate systematic modeling and design of polymer processes during the early development period. To capture and handle the subjective type of uncertainty, embedded in the preliminary process development, fuzzy theories are used as a basis to model and design the process in the presence of ambiguity and vagueness. Physical membership functions are developed for mapping the relation between process variables and the associated fuzzy uncertainties. Based on the qualitative results generated using our previously proposed “linguistic based preliminary design method,” the process modeling can be followed even in the absence of any process governing equations. The modeling is carried out by establishing an appropriate fuzzy reasoning system which provides a specific functional mapping that relates input process variables to one (or more than one) output performance parameter(s). A reduced yet feasible domain is generated by our qualitative design scheme to constrain the process variables. Now, any optimization routine can then be employed to search for a proper process design. We demonstrate the effectiveness of the proposed methodology by its application to a typical compression molding process.     

Failure analysis of a hot extrusion die used for Al-Li alloy processing

Al-Li alloys being developed as lighter, substitutes for conventional high strength Al alloys are to be processed by routine methods. During extrusion of a 8090 Al-Li alloy, the extrusion die container failed causing some alarm. This failed die container was analysed to examine if the failure was caused by interaction of Li diffusing out of Al-Li alloy with the carbides of die steel. The evidence, although not conclusive, is sufficient to exercise caution during such processing.     

Thermal post buckling behavior of rectangular antisymmetric cross-ply composite plates

Summary The thermal post buckling behavior of simply-supported, antisymmetric cross-ply plates with immovable edges is investigated in this paper. For this purpose, a one term approximation for the inplane and transverse displacements is assumed and Rayleigh-Ritz method is used to obtain the equations of equilibrium. The question, whether the true thermal buckling (bifurcation buckling under thermal loads) exists for such plates is also addressed to. The conditions under which the thermal buckling in the classical sense occurs are derived. It is shown that nonlinear bending stiffness for such plates is direction dependent, because of an extra quadratic nonlinear term in addition to the usual cubic nonlinear term in the governing equilibrium equation. Results are presented for various plate configurations.     

Triangular ray-tube analysis of dielectric lens antennas

A new method of analysis for the radiation characteristics of dielectric lens antennas with arbitrary inner and outer surfaces is presented. The analysis is based on representing the feed illumination by a contiguous set of ray tubes and including the effects of surface reflections and ray divergence. Radiation patterns and the antenna gain are then computed by evaluating the closed-form expressions developed for the Kirchhoff's integral of the aperture fields. The validity of the analysis method has been demonstrated by comparing the computations with measured results of two different spherical lenses and a shaped lens configurations. The analysis method presented takes into account some of the practical aspects associated with lens design such as surface zoning to reduce the mass and surface matching to minimize the reflection loss     

Solution-Processed n-Type Organic Field-Effect Transistors With High on /off Current Ratios Based on Fullerene Derivatives

Solution-processed n-type organic field-effect transistors (OFETs) based on the fullerene derivative {6}-1-(3-(2- thienylethoxycarbonyl)-propyl)-{5}-l-phenyl-[5,6]-C61 (TEPP) and phenyl-C61-butyric acid methyl ester (PCBM) in a multiring source/drain structure are reported. Devices with TEPP show high electron mobility up to 7.8 x 10^-2 cm²/Vs in the saturation regime for bottom-contact OFETs with Au S/D electrodes with a solution-processed fullerene derivative. The ON/OFF ratios reported in this letter, which are in the range of 10⁵ -10⁶, are among the highest values reported for such devices. This mobility is always higher compared to PCBM devices prepared in identical conditions. The mobility of TEPP and PCBM increased with increasing temperatures in the range of 100-300 K with activation energy of 78 and 113 meV, respectively, which suggests that the thermally activated hopping of electrons is dominant in TEPP.     

东濮凹陷马厂构造深层混源气藏气源探讨

根据东濮凹陷马厂深层气藏天然气常规组成、C1-C5单体气态烃碳同位素组成以及轻烃色谱指纹3方面微观信息的分析，并与文留气田文23井典型石炭系-二叠系煤成气以及白庙、刘庄、桥口煤成气-油型气混合天然气进行气／气对比，揭示了马厂深部气藏沙三段-沙四段天然气以煤成气为主，渗混入少量Es3-Es4油型气的混源特征，证实了东濮凹陷南部石炭系-二叠系煤系烃源岩具有一定煤成气供烃能力。     

Analysis of conduction heat transfer problems in steady, 2D regions with circular holes using a special boundary integral method

A special boundary integral method developed for two-dimensional regions containing circular holes is used to calculate temperature and heat transfer on the boundaries of several selected regions. The geometrical configuration of the region is arbitrary and convective boundary conditions are assumed. An important feature of the method is analytic representation of temperature and its normal derivative on the interior circular holes in the form of a harmonic series. This makes the application of the boundary integral method convenient and free from conditioning problems associated with small interior boundaries. Heat transfer from circular isothermal interior holes are calculated for several illustrative examples using three terms of the harmonic series representation for heat transfer at each of the circular boundaries. The results are presented and discussed.     

Off flavours in large waterbodies: physics, chemistry and biology in synchrony.

The Laurentian Great Lakes of North America are a drinking water source for millions of Canadian and US consumers. These waterbodies have undergone extensive change over the past century as a result of widespread degradation and remediation. Many of the Lakes are prone to taste and odour (T&O), and although these outbreaks have been poorly monitored, evidence suggests that they are increasing in frequency. Tracing and controlling T&O in such large systems presents a challenging task, due to their physical size and complexity. This paper presents an overview of recent investigative and management approaches to T&O in Lake Ontario and its outflow, the St. Lawrence River. We have identified three distinct patterns of T&O in these source-waters, caused by geosmin and 2-methylisoborneol and differing in their planktonic and benthic sources, and temporal and spatial dynamics. Each pattern has required a different approach by scientists and management, in partnership with the water industry. We have shown these T&O outbreaks are caused and moderated by physical, chemical and biological mechanisms over a spectrum of spatial and temporal scales. Canadian municipalities affected by these outbreaks have been key to the investigation of the links between T&O and ecosystem processes with the aim to develop more proactive water treatment and long-term management.